A SERVICE OF

logo

VC-412 User’s Manual
31
5. ICD COMMANDS FOR TELNET AND CONSOLE
NOTE: DO NOT ATTEMPT TO ISSUE COMMANDS TO THE SWITCH VIA THE ICD
COMMAND LINE INTERFACE UNLESS YOU HAVE READ THIS SECTION.
This section will discuss accessing the command line interface within the switch, and the
commands available in this mode. It is recommended that you read this section before
proceeding into the command line interface.
5.1 Enter ICD command line interface
From the Main Menu, Select option 3 for VDSL unit control
Now select Option 1 to issue ICD Commands. On “Enter Unit Number:” prompt, press
“0” and “Enter” button to enter ICD command prompt.