Planet Technology VC-412 Manual

A SERVICE OF

next previous

VC-412 User’s Manual

16

3.4.2 SNMP Access Table

Under SNMP Access Table and SNMP Trap Receiver Table options, you can set IP

addresses that will be enter into SNMP database relating to the functionality and status of

the

VC-412

. You can grant or deny accesses to a single PC or an entire subnet by entering

the appropriate IP address. To utilize this feature, you must have a workstation with

SNMP client access and protocols installed. The VC-412 has been tested with HP

OpenView® and Windows NT® SNMP client services, and should be also compatible

with most other SNMP client software. However, we do not recommend users to use

Silvercreek SNMP client, it has been found that it sometimes causes problem to the

firmware.

The SNMP Access Table specifies addresses In-Band or Out-of-Band of your network

that will have the ability to issue SNMP commands to the VC-412. Setting these IP

addresses and passwords will ensure only authorized SNMP clients can issue

commands to the VC-412.