A SERVICE OF

logo

- 303 -
5.8.5 ingress
Description Enable/disable ingress filter mode
Syntax ingress {enable | disable}
Parameter None
5.8.6 isolation
Description Enable/Disable default PVID isolation setting
Syntax isolation [disable]
Parameter None
5.8.7 link mode
Description Set link mode (uplink mode or user mode)
Syntax link mode {uplink | user}
Parameter None
5.8.8 max-mac
Description Set the maximum users allowed to access Internet based on user
MAC address counter on per ATM PVC basis
Syntax max-mac <number>
Parameter
Name Description
<number> Maximum number of the MAC addresses
Valid values: 1 ~ 4096 for GBE interface, 1 ~
128 for ADSL interface.
Default value: 0
Type: Mandatory
5.8.9 priority-regen
Description VLAN priority value regeneration or Delete VLAN priority tag filter
Syntax priority-regen incoming <incoming prio> {outgoing <outgoing prio> |
disable}
Parameter
Name Description
<incoming
prio>
Incoming VLAN priority value