8
“ With the cursor keys, select language,
country or Time zone and check if the
adjustment is according to your preferences.
If necessary, use the cursor keys to make
your adjustment and press
OK
to exit.
CAUTION : if you select a wrong country, the
channel numbering will not be according to the
standard for your country.
‘ Select service scan from the menu and
press
OK
to start the installation. The
service scan menu is displayed. All the
digital and analogue programmes are
searched for and stored automatically.
When the search is complete, the menu will
indicate the number of digital services and
analogues programmes found.
( Press the
OK
key twice to start watching
TV. The television then displays the current
programme.The installation is now
complete.
Switch on for the first time
The first time the TV set is switched on, a
congratulation message will appear on screen.
The language of which changes every 5 seconds.
If the menu is not displayed, press and hold
down the MENU button on the side of the TV
set for 5 seconds to display the menu.
& Press the
OK
button on the remote control,
the moment your prefered language is
visible on the screen.The Setup menu is
displayed
é
The language, corresponding country
and time zone is now preselected
according to the opening screen. However,
you can still change your preferences
before you start a service scan.
NOTE : If at some point of time you
decide to
reset to the factory default
settings, press and hold
down the MENU
button on the side of the TV set for 5
seconds. A congratulation message
will appear on screen. Repeat steps
1 - 5 as if this was the first time you
have turned on the TV.
