- 94 -
4. Select Network Status with / and press OK to access
Home network Network settings Network Status
5. Select Exit with / and press OK to set
Custom - Wireless Access Point
You can use the TV as a wireless access point and connect the network
equipment without an access point.
●
Confirm the PIN code, network settings of the equipment before starting
setup. For details, read the manual of the equipment.
1. Display the menu with MENU
2. Select Network
Network Connection Custom Wireless Access Point
with / / / and press OK to access
3. Select Connect to device in WPS with
/ and press OK to access
●
To set manually, select Change settings. (see below)
4. Select and set WPS(Push button) / WPS(PIN) with
/ and press OK to
access
WPS(Push button):
Set the equipment to WPS (Push button) mode. For details, read the
manual of the equipment.
WPS(PIN):
Enter the PIN code of the equipment.
●
If the connection has failed, check the settings and positions of the
equipment. And then, follow the on-screen instructions.
