- 25 -
This is for recording still pictures at a set interval. (60 Seconds/30 Seconds/10 Seconds/5 Seconds/
3 Seconds/OFF)
≥ If you tap the still picture recording icon, intermittent recording starts. (Tap it again to stop
recording.)
≥ You can also start/stop intermittent recording by pressing the photoshot button on this unit.
≥ The access lamp of this unit flashes.
≥ Normal recording of still pictures/motion pictures is impossible while in [Interval rec mode].
≥ Updating Live view images may stop while recording still pictures.
≥ The Self Timer is cancelled.
This is for recording still pictures using the timer.
If you record still pictures by setting this to [10 Seconds] or [2 Seconds], recording starts after the
set time elapses.
≥ After recording, the Self-timer is cancelled.
This is for automatically correcting the horizontal tilt of an image.
≥ [Level Shot Function] operates when starting to record a motion picture or still picture or when
starting to perform a live broadcast.
≥ [Level Shot Function] will not work in the following cases:
jWhen the tilt of the camera is large
jWhen the recording mode is set to [1920k1080/50p] or [1280k720/50p].
jWhen [Color Night Rec] is set to ON
jWhile [Slow motion mode] is set to ON
jWhen field of view is set to wide mode.
jWhen motion is continuous
This is for reducing camera shakes.
≥ [Image stabilization] cannot be set in the following cases:
jWhen the recording mode is set to [1920k1080/50p] or [1280k720/50p].
jWhen [Color Night Rec] is set to ON
jWhile [Slow motion mode] is set to ON
jWhen field of view is set to Wide mode.
≥ The compensation may not be as effective in an extremely dark place or when shakes are too
strong.
≥ This may not work correctly when this unit is at rest.
Interval rec mode
Self Timer
Level Shot Function
Image stabilization
HX-A100_VQT4X97.book 25 ページ ２０１３年２月１４日 木曜日 午後２時１６分
