A SERVICE OF

logo

Open as PDF
next previous
3 – 18 Programming
If you want to print subscript characters (characters appearing below the
normal print line), use the ESC S1 command before entering the characters.
To return to printing on the normal print line, use the ESC T command.
Superscript and subscript characters are printed in normal characters.
10 LPRINT “This is ”;
20 LPRINT CHR$(27);“S”;CHR$(0);“superscript”
30 LPRINT CHR$(27);“T”;“This is ”;
40 LPRINT CHR$(27);“S”;CHR$(1);“subscript”
50 LPRINT CHR$(27);“T”;“This is back to normal.”
This is
superscript
This is
subscript
This is back to normal
Enhanced and Emphasized Printing
ASCII Decimal Hexadecimal
ESC E 27 69 1B 45
ESC F 27 70 1B 46
ESC G 27 71 1B 47
ESC H 27 72 1B 48