A SERVICE OF

logo

Open as PDF
next previous
2 – 2 Operating Your Printer
Hex mode generates data rather than text, and a
sample is shown below. To terminate this mode,
switch the printer supply off and on again.
Switching on the printer supply whilst holding
down the SELECT and LINE FEED buttons will
generate a rolling ASCII character display.
Pressing the SELECT button stops this test. A
sample is shown below.
TOF SET Button: To set the first line position on each page (Top of
Form), deselect the printer, hold down the TOF
button and press the FORM FEED to move the
paper up, or the LINE FEED to move the paper
down until the print head is in the desired
position.