Ring Intercom Always On/Off
377
Enables/disables the feature that allows the phone to always place
private (non-handsfree) intercom calls.
Ring Tone Selection
398
(Not used on single line phones) Selects the type of ringing alert
tone that will be heard from the phone.
Routing Off
304
Disables System OAI Offering Control for third-party applications.
This feature requires you to enter a passcode. Once you disable
routing, you cannot enable it again (i.e., only the third-party
application can enable routing).
Station Monitor
321
(Hunt Group supervisors only) Allows a designated hunt group
supervisor to monitor a call of anyone in the associated hunt
group.
Station Speed Dial
Station Speed Dial Programming
382
383
Dials/programs one of the 10 Station Speed Dial numbers when
followed by a location code (0–9).
Steal
387
Allows the supervisor to take away a call from the hunt group
member/agent.
Switch Keymap
399
(Not used on single line phones) Allows a phone user to switch
between standard and alternate keymaps.
System Forward Enable
System Forward Disable
System Forward On/Off
352
353
354
Enables or disables the database-programmed System
Forwarding feature for this phone. The on/off feature code can be
used to toggle the feature on or off.
System Speed Dial
381
Dials one of the 1000-5000 System Speed Dial phone numbers
when followed by a location code (000–999 or 0000-4999). Also
used for reviewing System Speed Dial numbers.
Transfer to Hold
346
Transfers a call to another phone and places it on individual hold
so that it does not ring or send call waiting signals until it recalls.
Transfer to Ring
345
Transfers a call to another phone or to an outside phone number.
Table 12: Phone Feature Codes (continued)
Feature Name Code Definition
Page 6 of 6
