Administrator Phone Guide
Default Feature Codes
Each of the station features is assigned a feature code. Using the station’s dialpad, these codes
are entered to select trunks, process calls, and use special features. The following tables show
default feature code values:
Administrator Feature Codes on page 58
Diagnostics Feature Codes on page 59
Phone Feature Codes on page 63
Trunk Access Codes on page 62
Administrator Feature Codes
Table 9 summarizes feature codes accessible on administrator phones only.
Table 9: Administrator Feature Codes
Feature Name
Code
U.S. (Eur.)
Definition
Clear Network Alarm
9851
Clears network-wide alarms on every node in the network, but
will not affect system alarms. The Clear Network Alarm feature
code may be entered on any node in the network, but the Send
Network Alarms flag must be set for the administrator to clear
alarms on other nodes in the network.
Clear System Alarm
9850
Clears all local and network-wide system alarm displays on your
node.
Diagnostics On/Off
9900 (9100)
Enables or disables system diagnostics mode to perform
diagnostics functions such as freezing or unfreezing the
database, printing message logs, and seizing a device for
troubleshooting purposes.
Because diagnostics mode affects system performance, you
should run the diagnostics program when the system is idle.
Enable Network Day
9862
Places any or all remote nodes into day mode (you are prompted
for the node number).
Enable Network Night
9861
Places any or all remote nodes into night mode (you are
prompted for the node number).
Modem Disable
9867
Disables the internal modem; used in conjunction with the
assigned extension number of the modem.
Modem Enable
9866
Enables the internal modem; used in conjunction with the
assigned extension number of the modem.
Page 1 of 2
