7.6 Setting Up the Fax Registration
7
7-33
Using the Utility Mode Chapter 7
To change/delete a programmed speed dial number
1 Select the “FAX REGISTRATION”.
❍ Refer to “Setting Up the Fax Registration .
2 Press the [2] key from the 10-Key
Pad to select “SPEED DIAL”.
3 Using the 10-Key Pad, enter the
speed dial number that you wish to
change or delete.
4 Press the [No] key.
5 Using the [ ] and [ ] keys,
select either “EDIT” or “DELETE”,
and then press the [Yes] key.
❍ If “EDIT” was selected, the
name is displayed. (Continue
with step 6.)
❍ If “DELETE” was selected, the settings programmed for the speed dial
number are deleted and the speed dial input screen appears again.
❍ If you try to change the settings for a speed dial number used in group
dialing or program dialing, a confirmation message appears, asking whether
or not to change the corresponding settings programmed in group dialing or
program dialing.
If the [Yes] key is pressed, the corresponding settings programmed in group
dialing or program dialing are changed.
If the [No] key is pressed, the corresponding settings programmed in group
dialing or program dialing are deleted.
❍ If a speed dial number used in group dialing or program dialing is deleted, it
is also deleted from the corresponding group dialing or program dialing.
