A SERVICE OF

logo

Open as PDF
next previous
WEP
WEP
To connect using WEP, make sure the following profile options are used.
l Enter the SSID of the Access Point assigned to this profile
l Set EAP Type to None
l Set Encryption to Manual WEP
l Set Auth Type to Open
WEP Profile Configuration
Click the WEP keys/PSKs button.
WEPKeys
Valid keys are 10 (for 40-bit encryption)or 26 (for 128-bit encryption) hexadecimal characters. Enter the key(s) and click OK.
Once configured, click the Commit button. Ensure the correct Active Profile is selected on the Main tab and warmboot. The
SCU Main tab shows the device is associated after the radio connects to the network.
E-EQ-MX3XRG-W-ARC [ 208 ] MX3X Reference Guide