LXE E-EQ-MX3RFIDRG-A Manual

A SERVICE OF

next previous

Control Panel Options 93

E-EQ-MX3RFIDRG-A MX3-RFID Reference Guide

Format

Access: Start | Settings | Control Panel | RFID | Format tab

Use this option to select the output format that is sent to the open file from RFID read actions.

Figure 3-17 RFID Configuration Utility – Format tab

The default output format is HEX. When HEX is selected, the value of the Separator places the

separator between each 4 characters of the outputted hexadecimal tag value.

When EPC is selected, the user can enter a field separator to use between RFID tag read actions.

There are four EPC encoding schemes available:

• SGTIN-96

• SGTIN-64

• SSCC-64

• SSCC-96

Invalid or non-supported formats are represented in HEX digits that represent the bits of encoded

data read from a tag. Select EPC to decode the HEX digits into EPC tag data standards.

Tap the Restore Defaults button to set the parameters to their factory default setting. Tap OK to

save changes or X to ignore any changes and return to the Control Panel.