DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Object Repair Procedures
Page 10-1132SHDW-LNK (Memory Shadowing Link)
10
Table 10-406. TEST #318 Shadow Link Test
Error
Code
Test
Result Description/ Recommendation
1029
2011
2012
2013
2014
2018
2020
2024
2051
ABORT Refer to STBY-SPE Maintenance documentation for a description of these error
codes.
2047 FAIL The Standby SPE Maintenance/Tape Processor released the Standby SPE
processor with a request to clear Standby SPE Memory; Standby SPE Memory
was not successfully cleared.
1. Check for Standby SPE Processor errors and alarms. Refer to PROCR
(80286 Processor Circuit Pack) Maintenance documentation and follow
the prescribed procedures.
2. Check for Standby SPE Memory errors and alarms. Refer to MEM-BD
(Memory) Maintenance documentation and follow the prescribed
procedures.
3. If all problems found in Steps 1 and 2 have now been repaired, proceed
with Step 5. If no problems were found in Steps 1 and 2, proceed with
Step 4.
Continued on next page
