PCI Adapter
25
Instant Wireless
TM
Series
24
3. Windows will notify you that the driver has not passed Windows logo test-
ing. Since this product has been tested to work with Windows XP, click the
Continue Anyway button.
4. Windows will tell you when it has finished installation of the new driver.
Click the Finish button.
The Hardware Installation is complete. Next, go to “Configuring the
Network PC Card with the Configuration Utility”.
Windows XP will automatically identify the Network PC Adapter, once it is
connected to the PC, and prompt you to install the necessary driver. Make sure
that the Setup Utility CD (included) is inserted into your CD-ROM drive.
1. Select the Install from a list or specific location (Advanced) on the Found
New Hardware Wizard screen . Click the Next button to continue.
2. Click the button next to Search for the best driver in these locations.
Select Include this location in the search:, and enter D:\WPC11-
WDT11\Driver in the location field (if “D” is the letter of your CD-ROM
drive.) Click the Next button.
Installing the PCI Drivers for Windows XP
