A SERVICE OF

logo

Open as PDF
next previous
111
Chapter 6: Using the multipurpose feeder
3 Load the media face down and slide the paper
guide to the right until it touches the media.
If you are loading preprinted letterhead, place the
top of the page toward the printer face down.
4 Set the paper type for the type media you are
using.
You can set the paper type through the paper menu
on the operator panel or your printer driver. For
more information on paper type values, see “PAPER
TYPE” on page 22.
Printing from the
multipurpose feeder
Since the multipurpose feeder does not have auto size sensing,
you must set the correct paper size and type. Use the printer
operator panel or MarkVision to set the paper size and paper
type before you send a job to print.
Note:
Paper removed for
clarity.
Paper guide