Using the Configuration Menu 27
IP Address- The Internet IP address of the computer that has access to the Broadband Router. If you
input an asterisk (*) into this field, then any computer is able to access the Router.
Putting an asterisk (*) into this field would present a security risk and is not
recommended.
Subnet Mask- All the devices in the network must share the same subnet mask.
Port- The port number used to access the Broadband Router.
Example- http://x.x.x.x:8080 where x.x.x.x is the WAN IP address of the Broadband Router and
8080 is the port used for the Web-Management interface.
Tools > Time
Synchronize the modem’s clock with-
NTP is short for Network Time Protocol. NTP synchronizes computer clock
times in a network of computers. You have the option to manually set the
time or have it automatically done for you. By
default the Synchronize the
modem’s clock with is
Automatic.
Time- To manually input the time, enter the values in these fields for the Year, Month, Day, Hour,
and Minute. Click
Set Time.
Time Zone- Select the Time Zone from the pull-down menu.
