12
Turn the connection valve back and forth to make it easier
to remove. When removing the connection valve air can
escape from the valve of the object that has been inflated.
Therefore ensure that the connection valve is removed as
quickly as possible.
7.2 Using the Mini-Compressor to measure inflation pressure
NOTE:
For measuring the pressure of an inflated object the Mini-
Compressor does not require electricity.
1. Follow steps 3 to 6 in chapter 7.1 „Using the Mini-
Compressor to inflate objects“.
2. Read off the inflation pressure on the mamometer ᕢ
of the Mini-Compressor.
3. To conclude, follow step 12 in chapter 7.1 „Using the
Mini-Compressor to inflate objects“.
8. Storing the Mini-Compressor
Always store the Mini-Compressor at a clean and dry location.
To avoid damage, make sure that the air line ᕣ and the
power cable ᕥ are not folded.
IB_KH4106_U5004_UK 05.06.2007 10:33 Uhr Seite 12
