10
ƽ Danger!
Should you do so, you may receive an electrical shock!
2. Insert the cigar lighter plug ᕧ firmly into the cigar
lighter holder in the vehicle.
3. Check to see if an adaptor is required for use on the
object to be inflated. Should this be the case: Press
resp. screw the required adaptor into the opening of
the connection valve ᕤ.
4. Check to ensure that the fastening lever of the
connection valve ᕤ is open. When open, the fastening
lever is in a vertical position.
5. Press the opened connection valve ᕤ onto the valve
of the object to be inflated. Press it down so that it is
firmly seated. Should you be using one of the adaptors
ᕨ: Press the connection valve with the adaptor into
the valve of the object to be inflated.
6. Close the connection valve ᕤ, in that the fastening
lever is pressed down. Continue to firmly hold the
connection valve down. Ensure that the connection
valve cannot disconnect itself from the valve of the
object being inflated.
IB_KH4106_U5004_UK 05.06.2007 10:33 Uhr Seite 10
