30
Initial Settings
TEST TONE
Large
Small
Small
S woofer
F.SP
C.SP
R.SP
BASS
PRESS KEY
PREFERENCE1
PREFERENCE2 SPK.SETTING
5.1 CHANNEL
LEVEL
DELAY
TEST TONE
Large
Small
Small
S woofer
F.SP
C.SP
R.SP
BASS
PRESS KEY
PREFERENCE1
PREFERENCE2 SPK.SETTING
EXPERT
LEVEL
DELAY
LFE
BASS
BASS
SPK. SETTING Screen Settings
Use these settings to match the capabilities of the speakers connected to the player. In most cases, you should select
either 2 Channel or 5.1 Channel. You can also select Expert which allows you to adjust the output balance or delay
time.
Speaker Channel Settings
Adjust this setting to match the speaker system connected to the player.
• 2 CHANNEL: Use this setting when the player is connected to a 2 channel
amplifier or two speakers. The setting is completed simply by
selecting [2 CHANNEL].
• 5.1CHANNEL:Use this setting when the player is connected to a 5.1 channel
amplifier and you are using front, rear, center, and subwoofer
speakers. The settings are completed simply by selecting [5.1
CHANNEL].
• EXPERT: This setting allows you to make detailed adjustments to the output to match your speakers. It is
intended for experienced audio experts.
Note:
●
These settings are only effective for analog audio output. If you are using digital audio output, adjust the speakers
settings on the external decoder.
Expert Settings
● Speaker Size Settings
Select the speaker size for the speakers you are using.
1 Press 5/∞ to select the type of speaker.
• F.SP (Front speakers)
• C.SP (Center speaker)
• R.SP (Rear speakers)
2 Press 2/3 to select the settings.
• Large: Large speakers capable of playing bass tones.
• Small: Small speakers that do not reproduce bass tones well.
• None: There is no speaker connected to that channel.
If you select [SMALL] for the front speakers, you cannot select [LARGE] for any of the other speakers.
XVD9000E_p25-32.p65 2/27/01, 2:38 PM30
