6-3 Timer Recording
Press the [SHIFT
7] button to select <PROGRAM
TIMER> in the main menu and press the [SET +/
–]
button.
[The <PROGRAM TIMER> menu is shown on the
monitor and “SUN” blinks.
Set the day of the week (SAT).
Press the [SET +/
–] button to set the day of the week to
“SAT”.
Set the hour for the start time (8).
Press the [SHIFT f] button so that
“hour” for “START”
blinks. Press the [SET +/
–] button to set the hour of the
start time to “8”.
Set the minute for the start time (00).
Press the [SHIFT f] button so that
“minute” for
“START” blinks. Press the [SET +/
–] button to set the
minute of the start time to
“00”.
In the same way, set the hour (17) and minute (00) for
the stop time.
* When the stop time is earlier than the start time or the
same as the start time,
“T” is added to the beginning
of the stop time, showing that the stop time is for the
next day.
Set the recording speed mode (48).
Press the [SHIFT f] button so that
“SPD” blinks and
press the [SET +/
–] button to set the recording speed to
(48).
Set the program item.
Press the [SHIFT f] button so that
“PGM” blinks and
set the program item with the [SET +/
–] button.
1ST: Timer recording is executed only once on the most
recent specified day of the week (Saturday).
RPT: Timer recording is executed on the specified day
of the week (Saturday) every week.
OFF: Programmed timer recording is not executed.
5
To program timer recording at another time or day,
press the [SHIFT 7] button so that the next setting
line blinks and repeat steps 4 to 9.
End timer program setting.
• Press the [MENU] button twice.
[The normal screen is restored.
Press the [TIMER] button.
[The TIMER indication and effective timer-recording
programmed numbers light on the display and the
operating mode is automatically turned off to engage
the Timer-Recording Standby mode.
6 RECORDING
PROGRAM TIMER screen
Stop time
Recording speed
Start time
Day of the week
6-3 Timer Recording
6 RECORDING
[TIMER] button
[SHIFT f] button
[SET –] button
[SET +] button
[SHIFT 7] button
[MENU] button
5
Programming timer recording for more than 24 hours
(Example)
HDR is performed with the 48-hour recording speed from
9:00 p.m. on every Friday to 8:00 a.m. on every Monday.
Follow steps 1 to 5 in
“Timer Recording Program
Setting” on page 31.
Press the [SHIFT 7] button so that the 7th line
“SAT” blinks
on the <PROGRAM TIMER>. Programs lasting for more
than 24 hours can only be set on the seventh line.
Press the [SET +/
–] button to set the day of the week to
“FRI” and press the [SHIFT f] button.
[“Hour” for the start time blinks.
Press the [SET +/
–] button to set the hour of the start
time to “21” and press the [SHIFT f] button.
[“Minute” for the start time blinks.
Press the [SET +/
–] button to set the minute of the start
time to “00” and press the [SHIFT f] button.
[“Hour” for the stop time blinks.
Press the [SET +/
–] button to set the hour of the stop
time to “**”.
[“**:** **** **” is shown for the items after
“STOP”,
the “DAY” on the 8th line changes to the next day of
the week (SAT) automatically and
“**:**” is shown for
“START”.
Press the [SHIFT 7] button so that the day of the week
on the 8th line blinks.
Press the [SET +/
–] button to set the day of the week to
“MON” and press the {SHIFT f] button three times.
[“Hour” for the stop time blinks.
Press the [SET +/
–] button to set the hour of the stop
time to “8”.
In the same way, press the [SHIFT f] button and [SET
+/–] button to set the minute of the stop time to
“00”, the
recording speed to
“H/D 48” and “PGM” to “RPT”.
End timer program setting.
Press the [MENU] button twice.
[The normal screen is restored.
Press the [TIMER] button.
[The TIMER indication and program number
“7” light
on the display and the operating mode is
automatically turned off to engage the Timer-
Recording Standby mode.
