Common Menus for All Modes
MODE: / /
[ ]=Factory-preset
BASIC SETTING
PRESET
EXECUTE: Resets all settings to the factory-preset.
[CANCEL]: Returns to menu screen without executing reset.
DEMO MODE
OFF: Disables the function.
[ON]: Activates demonstration mode and shows various features on the display.
Demonstration starts in the following cases:
● When the menu screen is closed after [DEMO MODE] is set to [ON].
● With [DEMO MODE] set to [ON], if there is no operation for about 3 minutes after the
power switch is set to .
● Performing any operation during the demonstration stops the demonstration
temporarily. If no operation is performed for more than 3 minutes after that, the
demonstration will resume.
NOTES:
● If a recording medium is in the camera, the demonstration cannot be turned on.
● [DEMO MODE] remains [ON] even if the camera power is turned off.
OPERATION SOUND
OFF: Turns off operation sound.
BEEP: The beep sounds when the power is turned on or off, and at the beginning and end
of recording.
