Spot Exposure Control
MODE: /
Selection of a spot metering area enables more precise exposure compensation. You can
select one of the three metering areas.
Set the power switch to .
Press and hold ( ) so that is displayed.
Press ( ) twice so that the indicator appears.
● The spot metering area frame appears at the center.
Press to select the desired spot metering area frame.
Press . The setting is completed.
To lock the exposure
After step 4, press and hold for over 2 seconds. The indicator appears.
To cancel spot exposure control
Press ( ) once so that the indicator disappears.
NOTES:
● Spot exposure control may not be possible when some other functions are activated.
● Depending on the shooting location and condition, optimum result may not be
attained.
© 2004 Victor Company of Japan, Limited
