![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/9/4b/94b728ca-e38c-49aa-b256-1f79f939856d/94b728ca-e38c-49aa-b256-1f79f939856d-bg18.png)
24 EN
Date display
Time display
Date/Time display
Auto Date Record mode
Date-off mode
(No indication)
Disp.
The characters
you have set
using Character
Generator
10:45:56
Date display
Time display
Date/Time display
25.12.97
25.12.97
Auto date record mode
Auto date record
executed
25.12.97
Auto Date
Auto Date Record mode
Characters
Example of stored
characters
I LIKE YOU ࡖ
10:45:56
RECORDING
Advanced Features (cont.)
Date/Time Character Insert
This feature allows you to display date, time and
characters in the LCD monitor or the viewfinder and on a
connected colour monitor, record them manually or
automatically, and even make your own titles.
NOTE:
You should already have performed the Date/Time
Setting procedure (
੬
pg. 7). If you haven’t, do so before
continuing.
DISPLAY
SELECT MODE
1
Turn the PROGRAM AE select dial to any position
except AUTO LOCK.
SELECT DISPLAY
2
Press SEL. repeatedly until “ Disp.” appears.
CHOOSE DISPLAY MODE
3
Press SET while in Record–Standby to cycle through
the modes as shown in the illustration at left.
NOTES:
●
The selected display can be recorded.
●
If you don’t want to record the display, select Date-off
mode before shooting.
●
If you want to delete the display during shooting, press
SEL. repeatedly until “
Disp.
” appears then press SET.
●
To recall the display, press SET again.
AUTO DATE RECORD
Your camcorder automatically records the date for about
5 seconds after recording is initiated in the following
situations:
•After changing the date.
•After loading a cassette.
•After Auto Date Record mode is selected by pressing
SET.
In this mode, the date is replaced after 5 seconds with
“Auto Date”.
NOTES:
●
Setting PROGRAM AE to LOCK always engages the
Auto Date Record mode, and disables all other modes.
●
In the Auto Date Record mode, if the date changes
while you’re shooting, the date indication is recorded
for about 5 seconds from that point. It is not recorded
during any other recordings made on that day.
SET
SEL.
LCD monitor
or viewfinder
PROGRAM AE
select dial