A SERVICE OF

logo

14
Technical information
PC Signals that can be displayed
What is “Clear SD”
Connect “DVI” devices
LCD picture is unstable due to a large number of signal noise. Such noise
appears extensively especially when an LCD displays SD signals. Clear
SD mode resolves disadvantage for better picture quality.
If the signal doesnʼt appear, check that the vertical frequency on the
PC is set to “60Hz”.
Resolution 640 x 480(VGA) / 1024 x 768(XGA)
Vertical frequency (Hz) 60.0
Connect a “DVI” device to “HDMI-1” using “DVI-HDMI” conversion cable.
Connect analogue sound output of the DVI device to L and R terminals in
IN HDMI-1.
Set “Audio” in “HDMI Setting” to “Analogue” or “Auto” (P. 12)
HDMI-2 input does not support analogue sound (IN HDMI-1).
HDMI-2 input does not support DVI devices.
No use "Clear SD" Use "Clear SD"