12
Viewing Closed Caption Watching Video or DVDs
1. Select
2. Set
1. Select
2. Enter
1. Select item
3. set
2. Setting or Adjust
PC Position
Phase
Pixel
PC Setting
>
>
4 HDMI2
5 PC
1 Video-1
3 HDMI1
2 Video-2
AVSelect
0 01
1. Select
PC Position
2. Enter
1. Adjust
2. Set
Set Up
Auto Program >
Channel Summary >
Language
>
Video-1 Setting Video
AI Volume On
Appearance Size-1
HDMI Setting >
PC Setting
>
Closed Caption >
>
Closed Caption
Closed Caption Off
Caption < CC1 >
Text T1
Set Up
Auto Program >
Channel Summary >
Language
>
Video-1 Setting Video
AI Volume On
Appereance Size-1
HDMI Setting >
PC Setting
>
Closed Caption >
Select the input Source.
• Operate the connected device and play video.
1. Select “Set Up”
2. Select item
Video - 1 Setting
Switch between video and component signal
(Video / Component)
HDMI Setting
Setting for HDMI input
Size : Normally set to “Auto.” If wrong screen
size appears in 480p (525p), change to
“1” or “2”
Audio : Normally set to “Auto.” If no sound,
change to “Analogue” or “Digital.”
• “Audio” is not available for HDMI - 2
PC Setting
Setting for PC input
PC Position : Adjust screen position.
Phase : Sets the focus of screen.
Pixel : Adjusts the horizontal feature of screen.
Note: TV/VIDEO
button select the
video source by
move down or
use button 0-5 for
selection.
>
HDMI Setting
HDMI-1
Size < 1 >
Audio Analogue
HDMI-2
Size 1
You can watch closed captions or text information.
1. Select “Set Up”
1. Select
2. Enter
1. Select item
3. set
2. Setting
1. Select
2. Enter
2. Select “Closed Caption”
3. Select the desired caption or text channel.
Closed Caption : Select to view close caption or text information.
(Off / CC / Text)
Caption : Select the desired caption.
(CC1 / CC2 / CC3 / CC4)
Text : Select the desired text channel.
(T1 / T2 / T3 / T4)
