ENGLISH - 16 -
Setting Hue
During Playback NTSC system, this will ap-
pear in AV mode only when NTSC video source
is applied. Otherwise, Hue option is invisible
in Picture menu in TV mode :
Using
or button select Hue.
Press button to increase hue level.
Press
button to decrease hue level.
Center value is indicated with one arrow.
Reset
Press BLUE button to reset the picture modes
to factory default settings.
To Store the Settings
In the Picture Menu, all settings are stored
automatically.
Sound Menu
As you enter the main menu, sound will be the
second item. In the main menu, select Sound
using
or button, then enter the sound
menu by pressing / or OK button.
Setting Volume
As you enter the sound menu, Volume will be
the first selected option.
Press
button to increase volume.
Press
button to decrease volume.
Or you can directly change the volume set-
tings using
+ (to increase) or - (to
decrease) button.
Setting Bass Level
Using
or button select Bass Level.
Press
button to increase bass level.
Press
button to decrease bass level.
Setting Treble Level
Using
or button select Treble.
Press
button to increase treble level.
Press
button to decrease treble level.
Setting Balance
It allows adjusting the distribution between the
left and right speakers.
Using
or button select Balance.
Press button to change balance right-
ward.
Press button to change balance leftward.
Hyper Sound
Using or button select Hyper Sound.
Pressing or button will turn this fea-
ture on or off.
Pseudo/spatial effect can be turned on or off
via the Hyper Sound item in the Sound menu
or by remote control. In Mono transmission
the left and right channels will be added at left
channel and dummy stereo effect will be in-
troduced to end-user.
In stereo transmission it yields a phase differ-
ence between left and right channels. Hyper
Sound selection will be displayed on the
screen when the TV Status button is pressed
or programme is changed.
Selecting Sound Mode
Using
or button select Sound
Mode.
Press
or button to change Sound
Mode.
You can choose Mono, Stereo or Dual
(I-II) mode, only if the selected channel sup-
ports that Sound Mode.
You can also change sound mode directly
pressing I-II button on your remote control.
In case of bilingual broadcast (Dual Sound),
you can select original or dubbed language
using Sound Mode option. So when some-
body listens to the original language from the
loudspeakers, somebody else can listen to
the dubbed language from headphone.
01-ENG-2325W-17MB08P-1861UK-(LT-23B60SJ)_02062005.p65 02.06.2005, 10:5616
