Filename [XVS20AG_09Editing.fm]
Masterpage:Left+
70
EN
Page 70 April 9, 2003 6:18 pm
EDITING (S-VHS DECK) (cont.)
Dubbing
(from DVD to S-VHS)
You can dub selected scenes from the DVD disc to a cassette,
starting and stopping wherever you wish.
However, it is not possible to dub the copy-protected disc.
A
Load a cassette and place a disc.
For the S-VHS deck
Insert a cassette with the record safety tab intact.
For the DVD deck
A
Press
x
on the DVD deck to open the disc tray.
B
Place the disc in the disc tray.
C
Press
x
on the DVD deck to close the disc tray.
B
Prepare the S-VHS deck for dubbing.
A
Press
S-VHS
.
B
Press
p
to select recording speed.
C
Search for the point where you want to start dubbing
by pressing
4
,
5
or
3
then press
8
.
C
Prepare the DVD deck for dubbing.
A
Press
DVD
.
B
Search for the point where you want to start dubbing
by pressing
4
,
5
or
3
.
C
Press
9
to pause playback a little before the start
point.
D
Press and hold
7
, then press
9
.
●
“dub” blinks on the front display panel.
D
Start dubbing.
Press
4
to start playback.
E
End dubbing.
Press
8
.
NOTES:
●
Set “ON SCREEN GUIDE” to “OFF” (
੬
pg. 82) if you do not
want to record the on-screen display for DVD discs during
dubbing.
●
There may be a discrepancy of several seconds between where
you intend editing to start, and where it actually starts.
●
The superimposed indication during the operation or dubbing
is not recorded.
●
Turn on the TV and select the video channel (or AV
mode).
●
Slide the
TV/S-VHS/DVD
switch to the right.
XVS20AG_09Editing.fm Page 70 Wednesday, April 9, 2003 6:18 PM
