Masterpage:Right-No-Heading
EN
13
Filename [XVS20AG_06Index.fm]
Page 13 April 9, 2003 10:50 am
S-VIDEO Connection
8
To connect to a TV with S-VIDEO/AUDIO IN
connectors . . .
A
Connect the unit to TV.
A
Connect the aerial, unit and TV as per “RF
Connection”. (
੬
pg. 12)
B
Connect the unit’s S VIDEO OUT connector to the
TV’s S-VIDEO IN connector.
C
Connect the unit’s AUDIO OUT connectors to the TV’s
AUDIO IN connectors.
B
Connect the unit to mains.
Plug the end of the mains power cord into a mains outlet.
NOTES:
●
You can obtain high-quality S-VHS pictures.
●
If your TV is not stereo-capable, use the unit’s AUDIO OUT
connectors to connect to an audio amplifier for Hi-Fi stereo
sound reproduction.
●
For switching the TV’s mode, refer to the instruction manual of
your television.
Back of TV
Aerial connector
S-VIDEO IN
connector
AUDIO IN connectors
S-Video cable
(provided)
Audio cable
(not provided)
Mains outlet
Mains
power cord
Back of unit
RF cable (provided)
S VIDEO OUT
AUDIO OUT
TV aerial
cable
After the connection is completed, perform “Video
Channel Set” on page 15.
XVS20AG_01.book Page 13 Wednesday, April 9, 2003 10:53 AM
