Preparations
7
XV-NA77SL/GNT0036-002B/English
Preparations
NOTES
• If you set the PAL - NTSC - REMOTE selector on the rear panel
to “PAL,” component signals cannot be output correctly from the
COMPONENT VIDEO OUT jacks.
• There are some progressive TV and High-Definition TV sets
that are not fully compatible with the unit, resulting in the
unnatural picture when playing back a DVD VIDEO disc in the
Progressive scanning mode. In such a case, use the Interlaced
scanning mode. To check the compatibility of your TV set,
contact your local JVC customer service center.
• All JVC progressive TV and High-Definition TV sets are fully
compatible with the unit (Example: AV-61S902).
D Connecting to a TV with the SCART connector
You can enjoy using the unit by simply connecting it to your
television set with a 21-pin SCART cable.
NOTES
• Set [ANALOG OUT] in the [AUDIO] preference display to [2-CH
STEREO] (see page 39).
• If you use a multi-color system TV, you can play discs recorded
on both PAL and NTSC systems by setting the PAL - NTSC -
REMOTE selector to either “PAL” or “NTSC” accordingly.
• When the PAL - NTSC - REMOTE selector is set to “NTSC,” the
[NTSC] indicator lights up in the display window.
• If you set the PAL- NTSC - REMOTE selector on the rear panel
to “PAL” and hold down the VFP - PROGRESSIVE SCAN
button on the remote control unit so that the Progressive
scanning mode is activated (the PROGRESSIVE indicator on
the display window turns on), picture may be distorted or no
picture may appear on the TV screen.
Setting the RGB/COMP. - Y/C selector
When you connect the unit to a TV with the SCART connector,
set the RGB/COMP. - Y/C selector correctly according to your TV.
• If your TV only accommodates the composite video signal, set
the selector to “RGB/COMP.”
• If your TV accommodates Y/C signals, set the selector to “Y/C”
so that you can enjoy better-quality pictures.
• If your TV accommodates RGB signals, set the selector to
“RGB/COMP.”
RIGHT
LEFT
AUDIO
VIDEO
S-VIDEO
IN
IN
R
IG
H
T
R
E
A
R
L
E
F
T
C
O
A
X
IA
L
O
P
T
IC
A
L
P
C
M
/S
TR
E
A
M
DIGITAL OUT
AUDIO OUT
V
ID
E
O
S
-
V
ID
E
O
Y
P
B
P
R
VIDEO SIGNAL
SELECTOR
AV COMPU LINK
PAL
Y/C
NTSC
R
E
M
O
T
E
R
G
B
/C
O
M
P
.
VIDEO OUT
COMPONENT
AV
OUT
S
U
B
-
W
O
O
F
E
R
C
E
N
T
E
R
PAL
NTSC
REMOTE
Y/C
RGB/COMP.
The unit
SCART cable (not supplied)
The PAL - NTSC - REMOTE
selector is factory preset to “PAL.”
Set the selector to “PAL” or “NTSC”
to match the color system of your
TV (see also the NOTES below).
See “Setting the RGB/COMP. - Y/C
selector” below.
XV-XV-NA77SL[B].book Page 7 Thursday, July 31, 2003 8:04 PM
