EN 45
INSTALLING (JLIP Video Producer Software)
WINDOWS
ா
95
Refer to the Windowsா 95 manual or your
computer’s manual for details on basic
Windowsா 95 operating procedures.
Installation Procedure
This software offers you the choise of viewing
on-screen messages in English or French.
Select the desired language during installa-
tion by performing the following steps.
*To start the setup program . . .
1
Launch Windowsா 95
•Close any other applications that are
running.
2
Insert the "JLIP VIDEO PRODUCER" CD-
ROM into the CD-ROM drive.
3
Choose "Run" from the "Start" on the
taskbar.
4
If you want English on-screen
messages . . .
If the "JLIP VIDEO PRODUCER" CD-ROM
is in Drive D, type "D:\VDPROE\SETUP"
in the box to the right of "Name". If the
disk is in Drive E, type
"E:\VDPROE\SETUP".
If you want French on-screen
messages . . .
If the "JLIP VIDEO PRODUCER" CD-ROM
is in Drive D, type "D:\VDPROF\SETUP"
in the box to the right of "Name". If the
disk is in Drive E, type
"E:\VDPROF\SETUP".
•Click "OK".
•Once the setup program is running,
simply follow the instructions displayed
on-screen.
•When setup is complete, the "JLIP
VIDEO PRODUCER" icon appears on
the screen.
•"JLIP VIDEO PRODUCER Setup was
completed successfully." appears.
5
Click "OK" to complete installation.
WINDOWS
ா
3.1
Refer to the Windowsா 3.1 manual of or your
computer manual for details on basic
Windowsா 3.1 operating procedures.
Installation Procedure
This software offers you the choise of viewing
on-screen messages in English or French.
Select the desired language during installa-
tion by performing the following steps.
*To start the setup program . . .
1
Launch Windowsா 3.1
•Close any other applications that are
running.
2
Insert the "JLIP VIDEO PRODUCER" CD-
ROM into the CD-ROM drive.
3
Choose "Run" from "File" in the "Program
Manager".
4
If you want English on-screen
messages . . .
If the "JLIP VIDEO PRODUCER" CD-ROM
is in Drive D, type "D:\VDPROE\SETUP"
in the box to the right of "Name". If the
disk is in Drive E, type
"E:\VDPROE\SETUP".
If you want French on-screen
messages . . .
If the "JLIP VIDEO PRODUCER" CD-ROM
is in Drive D, type "D:\VDPROF\SETUP"
in the box to the right of "Name". If the
disk is in Drive E, type
"E:\VDPROF\SETUP".
•Click "OK".
•Once the setup program is running,
simply follow the instructions displayed
on-screen.
•When setup is complete, the "JLIP
VIDEO PRODUCER" icon appears on
the screen.
•"JLIP VIDEO PRODUCER Setup was
completed successfully." appears.
5
Click "OK" to complete installation.
NOTE:
This instruction manual uses English on-
screen messages in its explanation.
