EN 43
Controls
1 MONITOR OPEN Switch....................੬ pg. 12
2 REW Button ....................................... ੬ pg. 28
RETAKE R [Quick Review] Button.......
੬ pg. 14
3 FF Button ........................................... ੬ pg. 28
RETAKE F Button................................
੬ pg. 14
4 PLAY/PAUSE Button........................... ੬ pg. 28
5 STOP Button ...................................... ੬ pg. 28
6 SEL. Button ........................................ ੬ pg. 20
7 SET Button ......................................... ੬ pg. 20
8 Power Zoom Lever ............................ ੬ pg. 14
9 DISPLAY Button ................................. ੬ pg. 11
0 MENU Button .................................... ੬ pg. 21
! Multi-Function Control
•Exposure +/– ...................................
੬ pg. 17
•Focus FAR/NEAR ............................. ੬ pg. 18
•Menu Setting Change .......................
੬ pg. 24
•Tracking +/– ....................................
੬ pg. 29
@ PUSH Button ..................................... ੬ pg. 8
# EJECT Switch...................................... ੬ pg. 8
$ BATT. [Battery] RELEASE Switch .........੬ pg. 4
% Diopter Adjustment............................ ੬ pg. 6
^ Recording Start/Stop Button ................੬ pg. 10
& POWER Switch ..............................੬ pg.10, 28
* • Recording Mode [SP/LP]
Select Button ................................... ੬ pg. 8
•R.A. EDIT CANCEL Button ...............
੬ pg. 34
( R.A.EDIT IN/OUT Button....................੬ pg. 34
) Tape Length [T30•45•60]
Select Button...................................... ੬ pg. 8
COUNTER R [Reset]/M [Memory]
Button ................................................
੬ pg. 29
q EDIT Button ....................................... ੬ pg. 35
w R.A.EDIT Button................................. ੬ pg. 34
e PROGRAM AE Select Dial ..................੬ pg. 16
r BRIGHT Dial ..................................... ੬ pg. 28
t VOLUME Dial ................................... ੬ pg. 28
Connectors
y J terminal (JLIP (Joint Level Interface Protocol)
Connector.)
(Located beneath the jack cover)
•Connect the Editing Cable when performing
Random Assemble Editing (
੬ pg. 34).
•It is used to connect the camcorder to a device
such as a personal computer.
For further detail consult your nearest JVC
dealer.
u DC IN Jack......................................... ੬ pg. 5
The jacks i to p are located beneath the jack
cover.
i VIDEO OUT Jack............................... ੬ pg. 30
o RF DC OUT Jack................................ ੬ pg. 30
p AUDIO OUT Jack.............................. ੬ pg. 30
Indicators
Q Tally Lamp ......................................... ੬ pg. 10
W Power On Indicator ........................... ੬ pg. 10
Other Parts
E Video Light ........................................ ੬ pg. 15
R •Camera sensor
Be careful not to cover this area; built-in
here is the sensor necessary for shooting.
•Remote sensor.................................
੬ pg. 37
T Microphone ....................................... ੬ pg. 39
Y Shoulder Strap Eyelets........................ ੬ pg. 9
U Clock Battery Compartment................੬ pg. 6
I Battery Pack Mount ........................... ੬ pg. 4
O Electronic Viewfinder......................... ੬ pg. 6
P LENS COVER Switch ......................... ੬ pg. 10
a Grip Strap .......................................... ੬ pg. 9
s VIDEO LIGHT OFF/AUTO/ON
Switch................................................ ੬ pg. 15
d Speaker.............................................. ੬ pg. 28
f Tripod Mounting Socket......................੬ pg. 9
