EN 7
QUICK OPERATION GUIDE (D.S.C.)
4
2
1
3
Using the battery pack
1
Hook-on the battery pack’s top end to the
camcorder. (Charging procedure, ੬ pg. 10)
2 Push in the battery pack until it locks into
place.
To remove the battery pack
Slide BATT. RELEASE and pull out the battery
pack.
1 Set the System Select Switch to “D.S.C.”.
2 Set the Power Switch to “PLAY”.
— A still image stored in memory appears.
3 Press “W” or “T” of the Page Button to select
the still image you want to view.
(For more details, ੬ pg. 53.)
1 Slide the LENS COVER Open/Close Switch
to open the lens cover.
2 Set the System Select Switch to “D.S.C.”.
3 Set the Power Switch to “CAMERA”.
— The power indicator will light and an
image will appear.
4 Press the SNAPSHOT Button.
— A still image is shot and is stored in the
camcorder’s memory.
(For more details, ੬ pg. 46)
SUPPLY POWER
PLAYBACK
SHOOTING
Power Switch
Set to “PLAY”
System Select
Switch Set to
“D.S.C.”
Page Button
SNAPSHOT Button
Power Switch
Set to “CAMERA”
LENS COVER
Open/Close
Switch
BATT. RELEASE
Hook on.
Push in.
2
1
System Select Switch Set to “D.S.C.”
