6 EN
QUICK OPERATION GUIDE (VIDEO)
2
3
4
1
4
2
1
3
Using the battery pack
1
Hook-on the battery pack’s top end to the
camcorder. (Charging procedure, ੬ pg. 10)
2 Push in the battery pack until it locks into
place.
To remove the battery pack
Slide BATT. RELEASE and pull out the battery
pack.
1 Set the System Select Switch to “VIDEO”.
2 Set the Power Switch to “PLAY”.
3 Press REW.
— The tape will automatically stop at the
beginning of the tape.
4 Press PLAY/PAUSE.
— Playback starts and the playback picture
appears.
• To stop playback, press STOP.
(For more details,
੬ pg. 40.)
Or simply play back the tape on a VHS VCR
using the Cassette Adapter (VHS Playpak).
੬ pg. 43
1 Slide the LENS COVER Open/Close Switch
to open the lens cover.
2 Set the System Select Switch to “VIDEO”.
3 Set the Power Switch to “CAMERA”.
— The power indicator will light and an
image will appear.
4 Press the Recording Start/Stop Button.
— Recording starts.
•To stop recording temporarily, momentarily
press the Recording Start/Stop Button once
again.
(For more details, ੬ pgs. 18, 19)
SUPPLY POWER
INSERTING A VIDEO
CASSETTE
PLAYBACK SHOOTING
1 Slide EJECT to open the cassette holder.
2 Insert a video cassette.
3 Press PUSH to close the cassette holder.
(For more details, ੬ pg. 17)
BATT. RELEASE
Hook on.
Push in.
EJECT
PUSH
LENS COVER
Open/Close
Switch
Recording Start/Stop Button
Set to “CAMERA”
Set to “VIDEO”
PLAY/PAUSE STOP
REW
Set to
“PLAY”
Set to “VIDEO”
2
1
