5 SAFETY INSPECTION
Invacare
®
Top End Reveal
™
Wheelchair 26 Part No 1171880
❑ Ensure quick release axles and camber inserts are clean.
❑ Ensure camber bar mounting clamps are securely tightened.
❑ Ensure quick/quad release axles lock properly.
❑ Ensure no excessive side movement or binding when lifted and spun.
❑ Inspect handrims for signs of rough edges or peeling.
❑ Inspect spokes for bent or broken spokes.
❑ Ensure all spokes are uniformly tight.
❑ Clean upholstery and armrests.
❑ Inspect wheel/fork assembly for proper tension by spinning caster; caster should come to a gradual stop.
❑ Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.
❑ Ensure wheel bearings are clean and free of moisture.
❑ Inspect tires for flat spots and wear.
❑ If pneumatic tires check for proper inflation.
❑ Check that all labels are present and legible. Replace if necessary.
Inspect/Adjust Weekly
❑ Ensure wheel locks are easy to engage and prevent the wheels from moving.
❑ Ensure that the casters are free of debris.
❑ Ensure hand grips (if equipped) are not loose.
❑ Ensure quick release axles and camber inserts are clean.
❑ Ensure detent balls are fully expanded and locking onto axle bushing. Adjust as needed.
❑ Ensure quick/quad release axles lock properly.
❑ Inspect handrims for signs of rough edges or peeling.
❑ Inspect spokes for bent or broken spokes.
❑ Ensure All spokes uniformly tight.
