SECTION 4—ASSEMBLY
Orbit
™
28 Part No. 1073955
ƽ WARNING
The locking pins MUST be protruding past the top of the seat plate assembly for a
positive lock.
Keep locking pins clean.
10. Pushinonthetipofthequick‐releasepinandreinstallintheseat/baseframeplate
assembly.SeeDetailʺAʺofFIGURE 4.1.
11. Pulldownonquick‐releasepintoensurepositivelock.
NOTE:Ifaseatingsystemisbeingusedonthewheelchair,refertotheseatingsystemOwnerʹs
Manualforinstallationandremovaloftheseatingsystem.
12. Installtheseatingsystemontothewheelchair,ifsoequipped.
Disassembling the Seat Frame from the Base Frame
ƽ WARNING
Invacare recommends that the wheelchair users NOT be transported in vehicles of
any kind while in wheelchairs. As of this date, the Department of Transportation has
not approved any tie-down systems for transportation of a user while in a wheelchair,
in a moving vehicle of any type.
1. Ifnecessary,returnthewheelchairto0°
tilt.RefertoEngagingTilt‐In‐Spaceon
page 70.
2. Remove occupantfromwheelchair.
3. Pulldownandturnplungerslocatedonundersideofbaseframeplate.SeeDetailʺAʺ
ofFIGURE 4.1.
4. Pushinonthetipofthequickreleasepinlocatedonundersideofbaseframeplateand
pulloutofseat/baseframeplateassembly.SeeDetailʺAʺof
FIGURE 4.1.
5. Todisengagetheseatframefromthebaseframe,push/pulltheseatframeforward.
NOTE:Ifaseatingsystemisbeingusedonthewheelchair,refertotheseatingsystemOwnerʹs
Manualforinstallationandremovaloftheseatingsystem.
6. Ifsoequipped,removetheexistingseatingsystemfromthewheelchair.
7. Ifsoequipped,foldcantileverarms.RefertoUsing/Installing/AdjustingCantilever
Armsonpage 48.
8. Ifsoequipped,removetheT‐arms.RefertoInstalling/RemovingtheT‐arms
on
page 42.
9. Folddownthebackcanes.RefertoFolding/UnfoldingtheBackCanes
onpage 56.
10. Removerearwheels.RefertoRemoving/InstallingRearWheelsonpage 61.
