18. To install a 3.5 inch disk drive in bay 3, first attach the optional mounting
brackets to the 3.5 inch disk drive so that the mounting brackets are centered on
the 3.5 inch disk drive as shown. The screws attaching the mounting brackets to
the disk drive should pass through the lower set of slots on the mounting
brackets (if possible).
Note: Two different types of screws are included with the 3.5 inch disk drive
mounting brackets. Make sure that you attach the mounting brackets to
the disk drive using the screws with the larger threads. The other screws
cannot be inserted properly into the disk drive.
19. Insert the disk drive and mounting bracket assembly into the media drive bracket,
and attach the disk drive assembly to the media drive bracket using the screws
with the smaller threads. The screws attaching the disk drive assembly should
thread through the media drive bracket and into the lower set of holes in the
mounting bracket (if possible).
Chapter 4. Installing and Removing Options 4-95
