Hunter Fan 42762-01 Manual

next previous

42762-01•07/19/07•HunterFanCompany

7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)

Lower Switch

Housing

Plug

Connector

Housing

AssemblyScrew

Plug

Connector

Detail

Steps 7-6 – 7-7

7-10. To attach the lower switch housing, connect the upper plug

connector from the motor to the lower plug connector in the

lower switch housing assembly.

Note: Both plug connectors are polarized and will only ﬁt together

one way. Make sure the connectors are properly aligned before

connecting them. Incorrect connection could cause improper

operation and damage to the product.

7-11. Place the lower switch housing assembly over the upper switch

housing.Alignthesidescrewholesintheupperandlowerswitch

housings.Attachthelowerswitchhousingtotheupperswitch

housing with three housing assembly screws.

If you are not installing the light ﬁxture, your installation is

complete. Otherwise,proceedwithstep7-12.

7-12.Installonescrew-inCFL(compactourescent)bulb(19Watt

Maximum). Do Not use incandescent bulbs in this ﬁxture.

7-13 Insert the globe into the ﬁxture. Install and tighten the

thumbscrews manually. Do not overtighten.

Note: If thumbscrews are pre-threaded, loosen the screws before

inserting the globe, then retighten securely.

CFL bulb

(max19W)

Steps 7-12 – 7-13

Globe