Hunter Fan 42656-01 Manual

next previous

42656-01•08/14/09•HunterFanCompany

3 • Assembling the Fan

Steps 3-2 – 3-3

Downrod

Canopy

Set Screw

WARNING: Fan may fall if not assembled as directed in these

installation instructions.

3-1.Unbundlethewiresfromthefan.

For Standard or Angled mounting:

3-2. Insert the downrod through the canopy and canopy trim ring.

Feed the wires from the fan through the downrod on one side of

the pin in the ball.

3-3. Loosen the square head set screw on the adapter to install the

pipe and ball assembly. Note: When the pipe and ball assembly

isfullyinstalled,2-3threadsonthepipewillstillbevisible;thisis

normal. Securely retighten the set screw with a wrench or pliers.

Goto4 • Hanging and Wiring the Fan.

CAUTION: e adapter has a special coating on the threads. Do

notremovethiscoating;thecoatingpreventsthedownrodfrom

unscrewing.Onceassembled,donotremovethedownrod.

Canopy

TrimRing

Standard or Angled Mounting