A SERVICE OF

logo

Open as PDF
next previous
4 - 45
7. Carefully lift the front panel away from the device.
8. Position the replacement front panel so the tab on the back of the front panel lines up with the slot on the Thor VM1. Be
sure the two wiring connectors are also aligned.
9. Gently press the front panel into place.
10. Tighten the fourteen (14) captive M3 screws. In the order shown in the top figure above, use a #2 Phillips bit and
torque the screws to 6-7 inch pounds.
11. Reinstall the Thor VM1 in the Quick Mount Smart Dock.
12. When the Thor VM1 is placed in the powered dock, the UPS battery automatically reconnects.
13. Restart the Thor VM1.
14. When restarted, the Thor VM1 automatically recognizes the keyboard type (12 or 64 keys).
15. If the defroster configuration has changed, use the Test button on the Peripherals (see page 5-82) control panel to update
the Thor VM1 defroster configuration.
Slot on
Thor VM1
Wiring Connector
on Thor VM1
Slot on
Front Panel
Wiring Connector
on Front Panel