30
Press UP or DOWN button until the clock icon next to the time/date display will flash.
From the handheld remote control: Press
button.
Programming your location
IMPORTANT:
There are two options available for programming a location – an auto and manual.
In you choose auto programming, select the closest city code from the codes list programmed in
the unit, then all necessary location data (longitude, latitude, time zone and daylight savings time
adjustment) will be set automatically.
In case of the manual programming, select the code USR (user) from the city codes list, then you
would need to enter all location data (longitude, latitude, time zone and daylight savings time
adjustment) manually.
Auto-programming
• In the Time Window, press and hold SET button until the day of week language
abbreviation “ENG” will flash
• Press the UP or DOWN button selecting the day of the week in English, German, French,
Italian, Spanish or Dutch
• Press SET button to confirm selection
• Select the city code closest to your area by pressing UP or DOWN arrow buttons. Refer
to P. for a list of available codes
• Press SET button to confirm the selection and enter the year, calendar and
time setting
• Press the UP or DOWN arrow button selecting the current year, date, month, time format,
hour and minutes
Press SET button every time to confirm each selection and move to the next one
Manual Programming
• In the Time Window, press and hold SET button until the day of week language
abbreviation “ENG” will flash
• Press the UP or DOWN arrow button selecting the day of the week in English, German,
French, Italian, Spanish or Dutch
• Press SET button to confirm selection
• Select the code USR by pressing UP or DOWN arrow button
• Press SET button to confirm selection and enter to the latitude and longitude setting (the
degrees of latitude will flash)
• Press UP or DOWN arrow button to adjust the latitude (degrees, minutes and direction).
Press and hold either button for quick digits advance
• Press SET button to confirm selection
• Continue setting the longitude (degrees, minutes and direction) using the same
technique
• Press SET button to confirm the selection – “0:00 + tz” will flash prompting to enter the
