10
• Replace the battery compartment door and secure the screws.
• Secure the thermo-hygrometer remote sensor in the desired location.
Mounting
• The remote thermo-hygrometer sensor can be placed on the flat surface or mounted on
the wall in vertical position
• Use the wall mount hardware and screws provided when mounting the
thermo-hygrometer sensor on the wall
Placement
• The remote thermo-hygrometer sensor should be placed in the area with a free air
circulation and sheltered from the direct sunlight and an extreme weather conditions.
• Ideally, place the thermo-hygrometer sensor above the natural surfaces (such as a
grassy lawn).
• Avoid placing the thermo-hygrometer sensor near sources of heat such as chimneys and
heating elements.
• Avoid any areas collecting and radiating a heat from the sun, such as metal, brick or
concrete structures, paving, patios and decks.
• The international standard for the valid air temperature measurements is 4 feet
(1.25meters) above the ground.
Operation
Immediately after batteries are correctly installed, the remote sensor will start transmitting a
temperature and humidity data to the main unit.
Note: Every time after replacing batteries in the sensor, press and old DOWN arrow button
for 3-4 seconds on the main unit’s control panel or hand held remote control.
