8–9
User Configurable Suffixes, All Data
Note: Scan the Enter/Exit Configuration mode code before trying to set this
feature. Refer to Multi-Code Method on page 1–1.
~ Configurable Suffix Character #1 – A suffix ID
can be added and assigned for data
transmission. Use this code with a 3 code byte
sequence, on page 16–
1, which represents the
~ Configurable Suffix Character #2 – Assigns a
second configurable suffix character.
~ Configurable Suffix Character #3
– Assigns a
third configurable suffix character.
~ Configurable Suffix Character #4 – Assigns a
fourth configurable suffix character.
~ Configurable Suffix Character #5 – Assigns a
fifth configurable suffix character.
~ Configurable Suffix Character #6 – Assigns a
sixth configurable suffix character.
~ Configurable Suffix Character #7 – Assigns a
seventh configurable suffix character.
~ Configured Suffix Character #8 – Assigns an
eighth configurable suffix character.
~ Configurable Suffix Character #9
– Assigns a
ninth configurable suffix character.
~ Configurable Suffix Character #10 – Assigns a
tenth configurable suffix character.
* Clear All User Configurable Suffixes
