8–2
User Configurable ID Characters, Code Specific
* Use Configurable Code ID Bytes as Prefixes –
User configured, code specific ID bytes are
transmitted before the data. If using prefixes,
user configured suffixes cannot be used.
Use Configurable Code ID Bytes as Suffixes –
User configured, code specific ID bytes are
transmitted after the data. If using suffixes, user
configured prefixes cannot be used.
‡ Enter configuration mode then scan this bar code followed by the three
code byte bar codes (on page 16–1) that represent a unique ID character to
be associated with this bar code type.
~ Configurable UPC-A ID ‡
~ Configurable UPC-E ID ‡
~ Configurable EAN-8 ID ‡
~ Configurable EAN-13 ID ‡
~ Configurable Code 39 ID ‡
~ Configurable Code 128 ID ‡
~ Configurable Code 93 ID ‡
~ Configurable Code 11 ID ‡
~ Configurable Telepen ID ‡
