11 - 9
Serial Trigger Mode Read Time-Out
(0 - 300,000 ms) *30,000
TRGSTO#### 3-6
Presentation Presentation Mode PAPTPR 3-6
LED Illumination - Presentation
Mode
Off PWRLDC0 3-6
Low PWRLDC100 3-6
*High PWRLDC150 3-6
Presentation LED Behavior After
Decode
*LEDs On TRGPCK1 3-7
LEDs Off TRGPCK0 3-7
Presentation Sensitivity Range 0-20 (*1) TRGPMS## 3-7
Presentation Centering Window Presentation Centering On PDCWIN1 3-8
*Presentation Centering Off PDCWIN0 3-8
Left of Presentation Centering Window (*40%) PDCLFT### 3-9
Right of Presentation Centering Window (*60%) PDCRGT### 3-9
Top of Presentation Centering Window (*40%) PDCTOP### 3-8
Bottom of Presentation Centering Window (*60%) PDCBOT### 3-8
CodeGate *CodeGate Off Out-of-Stand AOSCGD0. 3-9
CodeGate On Out-of-Stand AOSCGD1. 3-9
Streaming Presentation Streaming Presentation Mode - Normal PAPSPN 3-9
Streaming Presentation Mode - Enhanced PAPSPE 3-9
Mobile Phone Read Mode Hand Held Scanning - Mobile Phone PAPHHC 3-10
Streaming Presentation - Mobile Phone PAPSPC 3-10
Hands Free Time-Out Range 0 - 300,000 ms TRGPTO###### 3-10
Character Activation Mode *Off HSTCEN0 3-10
On HSTCEN1 3-10
Activation Character HSTACH## 3-11
Do Not End Character Activation After Good Read HSTCGD0 3-11
*End Character Activation After Good Read HSTCGD1 3-11
Character Activation Laser Timeout (Range 1 -
65525) *5000 ms
HSTCDT##### 3-11
Character Deactivation Mode *Off HSTDEN0 3-11
On HSTDEN1 3-11
Deactivation Character HSTDCH## 3-12
Reread Delay Short (500 ms) DLYRRD500 3-12
*Medium (750 ms) DLYRRD750 3-12
Long (1000 ms) DLYRRD1000 3-12
Extra Long (2000 ms) DLYRRD2000 3-12
User-Specified Reread Delay Range 0 - 65,535 ms DLYRRD##### 3-13
Illumination Lights *Lights On SCNLED1 3-13
Lights Off SCNLED0 3-13
Aimer Delay 200 milliseconds SCNDLY200 3-14
400 milliseconds SCNDLY400 3-14
*Off (no delay) SCNDLY0 3-14
User-Specified Aimer Delay Range 0 - 4,000 ms SCNDLY#### 3-14
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric entry
Page
