RECORDING A PROGRAM - RECORDING TIPS
59
RECORDING A PROGRAM - RECORDING TIPS
To watch one program while recording another
pic
1 Once you have set the VCR for recording, press the VCR/TV button.
The VCR indicator disappears. Now, you will be viewing through your TV
only.
pic
2 Switch channels using your TV controls or the VCR remote, if it's
programmed to control your TV
Notes:
• You can check on the recording by pressing VCR/TV again. This will switch you
back to viewing through the VCR, and you'll see the program you are recording.
• If you're hooked up with an audio/video cable: Switch the TV from AUX or
VIDEO mode back to the TV mode, then select the channels you want to watch,
as described in Step 2. Switch TV back to AUX or VIDEO to monitor your
recording.
To change the channel being recorded
pic
1 Press the PAUSE/SELECT button to stop the recording temporarily.
pic
2 Press the CH ( / ) button or number buttons to change the
channel to the one you prefer.
Use the DSS® box to select the DSS® channel you want to record.
• The DSS® program will appear.
