2-1
Installing the Switch
2
Installing the Switch
The HP ProCurve 3500, 3500yl and 6200yl switches come with an accessory
kit that includes the brackets for mounting the switch in a standard 19-inch
telco rack, in an equipment cabinet, and with rubber feet that can be attached
so the switch can be securely located on a horizontal surface. The brackets
are designed to allow mounting the switch in a variety of locations and
orientations. For other mounting options contact your local ProCurve autho-
rized network reseller or HP ProCurve representative. This chapter shows
how to install the switch.
Caution If the switch is to be shipped in a rack, be sure to use only an HP 10K rack.
Mount the switch using rail kit, HP ProCurve 1U RK MT SWITCH 10K ALL,
part number 356578-B21 and shelf kit AB469A, HP rx 16/26 Factory Rack-
mount Shelf Kit. Both kits must be used. Otherwise you will void the warranty.
Included Parts
The HP ProCurve 3500, 3500yl and 6200yl switches have the following compo-
nents shipped with them:
■ HP ProCurve 3500, 3500yl and 6200yl switches Quick Setup Guide
■ Read Me First
■ Customer Support/Warranty booklet
■ Console cable
■ Saftey and Regulatory booklet
