A SERVICE OF

logo

2-10
Installing the Series 8200zl Switch
Installation Procedures
Installing the Series 8200zl
Switch
WARNING For safe operation, please read the “Installation Precautions” on page
2-5 and page 2-6 before mounting the switch.
1. Use a #1 Phillips (cross-head) screwdriver and attach the mounting
brackets to the switch with the included 8-mm M4 screws.
For the Switch 8200zl, each bracket is attached with four screws as shown
in the following illustration.
Figure 2-2. Attaching Brackets to the 8200zl Switch
8 mm
M4 screws