2-1
Installing the Switch
2
Installing the Switch
The ProCurve Series 3500yl and 6200yl Switches come with an accessory kit
that includes the brackets for mounting the switch in a standard 19-inch telco
rack, in an equipment cabinet, and with rubber feet that can be attached so
the switch can be securely located on a horizontal surface. The brackets are
designed to allow mounting the switch in a variety of locations and orienta-
tions. For other mounting options contact your local ProCurve authorized
network reseller or ProCurve representative. This chapter shows how to
install the switch.
Caution If the switch is to be shipped in a rack, be sure to use only an HP 10K rack.
Mount the switch using rail kit, ProCurve 1U RK MT SWITCH 10K ALL, part
number 356578-B21 and shelf kit AB469A, HP rx 16/26 Factory Rackmount
Shelf Kit. Both kits must be used. Otherwise you will void the warranty.
Included Parts
The Series 3500yl and 6200yl Switches have the following components shipped
with them:
■ ProCurve Series 3500yl and 6200yl Switches Installation and Getting
Started Guide, this manual
■ ProCurve Manager - CD ROM and booklet
■ Read Me First
■ Customer Support/Warranty booklet
■ Console cable
