Information Menu 32
The following table describes the User Name information.
Table 17 User Name Information menu
Field Usage
user
Displays the status of the user access level.
oper
Displays the status of the oper (operator) access level.
admin
Displays the status of the admin (administrator) access level.
Current User ID Table
Displays the status of configured user IDs. To configure new user IDs, use the
/cfg/sys/access/user/uid command.
Layer 2 information
Command: /info/l2
[Layer 2 Menu]
fdb - Forwarding Database Information Menu
lacp - Link Aggregation Control Protocol Menu
8021x - Show 802.1x information
stp - Show STP information
cist - Show CIST information
trunk - Show Trunk Group information
vlan - Show VLAN information
gen - Show general information
dump - Dump all layer 2 information
The following table describes the Layer 2 Information Menu options.
Table 18 Layer 2 Information Menu options
Command Usage
fdb
Displays the Forwarding Database Information Menu.
lacp
Displays the Link Aggregation Control Protocol Information Menu.
8021x
Displays the 802.1x Information Menu.
stp
I
n addition to seeing if STP is enabled or disabled, you can view the
following STP bridge information:
• Priority
• Hello interval
• Maximum age value
• Forwarding delay
• Aging time
You can also refer to the following port-specific STP information:
• Port number and priority
• Cost
• State
cist
Displays Common internal Spanning Tree (CIST) bridge information,
including the following:
• Priority
• Hello interval
• Maximum age value
• Forwarding delay
You can also view port-specific CIST information, including the following:
• Port number and priority
• Cost
• State
